Each title on this page is linked to an article that I have written for this website. “Click” on a link and it will take you to that specific article.
– Driveway Preparation (Tree Removal & Excavating)
– 06-19-2014 – Boat Hauling – Part One (Video)
– 06-21-2014 – Removing The Bilge Plates
– 06-28-2014 – Boat Hauling – Part Two (Video)
– 06-30-2014 – Removing The Starboard Bilge Plate Shoe (Part One)
– 07-04-2014 – Removing The Starboard Bilge Plate Shoe (Part Two)
– 07-07-2014 – Doing Some Exploratory Grinding On The Hull
– 07-07-2014 – Removing The Head Plumbing
– 07-07-2014 – Removing The Head
– 07-15-2014 – Removing The Holding Tank
________________________________________________________________________________
** NOTE** There is a HUGE gap of time between my last “Golden Hind” post and the new ones below! Don’t worry, I have documented all of the work that I have been doing over the past year. I will be updating this page of links, in chronological order over the next few months. For now, I need to start somewhere in doing this, so below will be more current posts and I will work backwards from there.
If you would like to view some of the images that will be included in the “missing posts”, you can follow the added link at the end of this paragraph. It will take you to a Facebook photo album that contains 262 photographs.
– Facebook Photo Album of 262 images – May 2015 – early August 2015
There is also a video that I made of what the process was like to restore the old cast iron ballast. I did this work back mid-July of 2015. The video will be included in an upcoming article! But for now, here is a link to it:
– (Video) Restoring The Cast Iron Ballast – July 17, 2015
________________________________________________________________________________
– 08-20-2015 – More Work On The Rudder
– 08-21-2015 – Laminating The First New Floor Timber
– 08-22-2015 – Fitting The First New Floor Timber
– 08-23-2015 – New Sawhorses – Fitting 2nd Floor Timber – Laminating 3rd Floor Timber
– 09-07 to 09-12-2015 – Fitting, Sealing, Coating, Floor Timbers – Part 01
– 09-07 to 09-12-2015 – Fitting, Sealing, Coating, Floor Timbers – Part 02
– 09-07 to 09-12-2015 – Fitting, Sealing, Coating, Floor Timbers – Part 03
– 09-07 to 09-12-2015 – Fitting, Sealing, Coating, Floor Timbers – Part 04
– 09-13-2015 – Stripping Paint Off Of The Frames
– 09-14 to 09-20-2015 – Making New Frames – Part 01
– 09-21 to 09-25-2015 – Making New Frames – Part 02 – (Includes a Video)
– 09-27-2015 – Removing Old Frames and Fitting New Frames – Part 01
– 09-27-2015 – Removing Old Frames and Fitting New Frames – Part 02
– 09-28-2015 to 10-01-2015 – Removing Old Frames and Fitting New Frames – Part 03
Black Lab Adventures 
what a lovely lady
i’m sure you have already subscribed to WOODEN BOAT FORUM
http://forum.woodenboat.com/index.php
many inspiring threads, there
the BILGE KEELS should of great assistance in GOING TO WIND
bet you can’t wait for the weather to allow you to get her out from under wraps get to work
MAY YOU ALWAYS HAVE A FAIR BREEZE & FOLLOWING SEAS
sw
Great article
Thanks, Michael!
eagerly awaiting the updates!
As the temperatures have begun to warm up, and I can get epoxy to cure(!), work has commenced again on ElizaLin! Over the past two weeks, I have installed a set of frames and a matching floor timber, along with gluing up three new floor timbers. Photos will begin to be posted in the near future!
Keep up the good work
Thank you, Chris!
HI Barry,
I just got this (Photo) to replace the Volvo Penta MD1B
Chris